LED Street Light is not used after installation and use. It needs normal maintenance work to make the LED street light play the performance of the product. How to carry out the waterproof work in the maintenance work? The LED Street Light Manufacturer below explains to you in detail. .
1. How to maintain the led street light?
In the LED street lamp use system, the battery is the biggest difficulty in maintenance, because the current life of the normal battery is 2 to 3 years, and the battery charge and discharge conditions should be checked frequently during the life cycle. Observe the electrode or wiring at any time. Corrosion or poor contact.
2. How to carry out the waterproof work of led street light?
For the sealing performance of the lamp cap, it must be cleared. The waterproof treatment of the lamp cap can ensure the service life of the street lamp. Therefore, the choice of the lamp casing is very important. When choosing, it is necessary to pay attention to whether the style has waterproof performance. For the controller, it is generally placed inside the road during installation, so as to better avoid the wind and the sun. The battery should have a certain degree of waterproof performance. For the battery installation, the battery is buried under the ground, about 40 cm, to avoid flooding. Finally, LED Street Light China should be tested to see if the street light is normally lit. If it is lit, it can be used normally. If it is not, it needs to be replaced.
Basically, the above descriptions summarize the above instructions on how to maintain the LED street lamp and waterproof work. If you have any questions, please feel free to contact Shenzhen Riyueguanghua . We will continue to update the instructions for you.
Contact Person: Mr. Hugh Hu
Tel: +86 136 8680 7553