Led Flood Light With Driver uses floodlighting to brighten the facade of the building and is one of the most important ways to invent and beautify the city's night scene. This kind of lighting method can not only illuminate the facade of the building, but also through the careful planning of the lighting planner, it can also invent a more fascinating and touching effect than the day, with distinct layers, emphasis and outstanding building characteristics. High Bright Solar Led Flood Light is a point source that can shine evenly across the lake. Its scale of illumination can be adjusted to a realistic octahedron in the scene.
However, floodlighting is only one of the ways to brighten buildings. It is by no means the only one. Never mention that the facade lighting is non-flooding, and the facade lighting is not equal to floodlighting. Buildings with floodlighting should have the following two conditions: First, the appearance of the illuminated building should have a certain reflectance. Floodlighting is the use of floodlights to illuminate the exterior of the illuminated building, and then through its reflection, people see the brightness from the direction of the survey. The second is: the best reflection of the exterior of the illuminated building is diffuse reflection, at least it is also necessary to be scattered reflection, all kinds of appearance must have a certain reflection light, and because the brightness of the appearance is not the same, the reflection is not the same, roughly divided For directional reflection, scattered reflection and diffuse reflection.
Under low current, the temperature rise of the LED floodlight is not obvious. If the ambient temperature is high, the main wavelength of the LED floodlight will be red-shifted, the brightness will decrease, and the uniformity and consistency of the light will be deteriorated. The temperature rise of the special dot matrix and large display screen has more obvious influence on the reliability and stability of the LED floodlight. Therefore, the heat dissipation plan is very important. Floodlights illuminate objects evenly from a specific point in all directions, and it's best to use them to push light bulbs and candles. Floodlights can be placed anywhere in the scene. For example, it can be placed outside the size of the merma, or inside the object. It is common to use many different colors of floodlights in the scene. These floodlights can cast shadows and blend them on the model. Because the floodlights have a large scale, the floodlights are very simple to guess, and there are many auxiliary uses for this kind of light. For example, if the floodlight is placed close to the surface of the object, it will appear on the surface of the object. There is a bright light on the hall.
The color temperature of Module Led Flood Light can be sensitively selected between 4000-7000K, and the imaging index can be up to 80 or more. The illuminating color of the luminaire is closer to natural light. LED lamp light source utilization is high, about 90% LED diode illumination point of view can be consistent with the luminaire view point of the luminaire, so most of the luminaire light directly shines to the designated area, only a small part is reflected, so the light source utilization rate is high . LED lights do not have a delay time to start, can be connected at any time, work at any time, can easily complete intelligent energy-saving control.
Contact Person: Mr. Hugh Hu
Tel: +86 136 8680 7553