There are many types of products on road lighting. According to the classification of light sources, there are led street lighting fixtures, energy-saving lights, high-pressure sodium lights, metal halide lights, and the like.
According to different occasions, it can be divided into ordinary street lights, high pole lights, courtyard lights and landscape lights, single-arm street lights, double-arm street lights, solar street lights and so on.
Mainly used for road lighting of main roads, secondary roads, branch roads, factories, schools, gardens, city squares, courtyards, etc.
Which of the several common light sources is better?
Metal halide lights and energy-saving lights are costly, long-lived, and easy to maintain, with the disadvantage of relatively high power consumption.
The high-pressure sodium lights has good fog-passing performance and is a street light source commonly used in the past. However, the life expectancy is low and the energy efficiency is very poor, and the CCT is low, so it is not recommended selecting the street light source of the high pressure sodium lights.
LED lights have long life, easy maintenance, high efficiency, no UV, high color rendering, low energy consumption, and the disadvantage is relatively high cost. However, in terms of long-term benefits, LED street lights are still recommended.
Conventional street light poles are generally 4 meters, 4.5 meters, 5 meters, 5.5 meters, 6 meters, 6.5 meters, 7 meters, 7.5 meters, 8 meters, 8.5 meters, 9 meters, 9.5 meters, 10 meters, 10.5 meters, 11 meters, 11.5 meters, 12 meters. If we are higher, we call it a middle pole light and a high pole light. In addition, the height of the garden lights pole is generally 3 meters, 3.5 meters, 4 meters. Generally, the height of the street lights needs to consider the width of the road surface and the power of the light source. Common LED street lights are usually mounted on poles 10 meters (32 ft) high, and 8 meters (26 ft) are also common.
Each project is combined with the form of the road and the beautification and planning of the city.
There are many ways to install and design LED street lighting. According to the actual situation, the lighting method is more suitable for the road lighting source of the city. The feature of this Mars series of street lights is that LED street lights can be set in a variety of ways on the roads that need to be illuminated. The color is high and the color temperature can be customized. The full range of standard open circuit switches, opening the power supply cover will cut off the power supply of the entire lamp system, plus the dual protection before the installation cut off the mains. Close the power cover and power it on. The Mars slider can be adjusted up and down by 15 degrees and more to suit the required lighting angle, and the dusk to dawn photocell sensor is configured. Can greatly reduce energy consumption. It also plays a role in decorating and embellishing the environment and beautifying the city.
We have formed a series of product lines for LED street lights. At the same time, it can provide corresponding led street lighting solutions.
Welcome to contact Shenzhen riyeguanghua.
Contact Person: Mr. Hugh Hu
Tel: +86 136 8680 7553