With the acceleration of China's urban construction work, traditional street lamps with high-pressure sodium lamps as the mainstream, due to high energy consumption and long life, the road lighting power consumption remains high, accounting for 38% of the social lighting electricity consumption, roads Lighting has become a field of lighting that consumes a lot of electricity. LED Street Light is different from traditional sodium lamps, which can reduce power consumption to the greatest extent, and the comprehensive energy saving rate can reach more than 50%. So what should you pay attention to in the construction of LED Street Light?
1. LED Street Light must be equipped with a protective grounding wire to prevent the pole from being charged for unpredictable reasons.
2, LED Street Light accessories are complete, no deformation, paint peeling and other phenomena, it is strictly prohibited to hit LED Street Light during construction.
3, LED Street Light installation longitudinal center line and the longitudinal center line of the lamp arm should be consistent, the horizontal horizontal line of the LED street light is parallel to the ground, and the visual inspection is not skewed after tightening.
4. When the LED Street Light lamp head is adjustable, the center line of the light source should be within the L/3-1/2 range of the road width.
5. The construction personnel need to be certified to work: the construction personnel must have an electrician network operation permit or professional qualification certificate issued by the state-level unit.
6, LED street light elevation street width and the light distribution curve of the lamp to determine, the elevation angle of each street should be consistent.
7, LED street light installation height, the same street lighting installation height must be consistent (lighting center to ground height).
8. Construction safety must be ensured: Before the construction, it is ensured that the construction area has been cut off. The construction personnel must wear a safety belt and wear a safety helmet before lifting the crane.
LED street light manufacturer should pay attention to the LED Street Light Manufacturer. In addition to its advantages of energy saving, environmental protection, safety and stability, long life, etc., it is also easy to assemble and maintain, and the power wattage is available. Any combination of module products, intelligent control, etc.; new lighting LED smart street lights without adding too much manpower and material resources, set up the program in advance, automatic switch in the evening and morning, easy to operate, easy to manage, better To meet the development needs of urban road construction, it provides convenience for the maintenance and management of street lamps.
Contact Person: Mr. Hugh Hu
Tel: +86 136 8680 7553